iphepha_ibhena

Iimveliso

I-4D yangaphambili ye-4D yepro zirconia ivimba imathiriyeli yeZirconium kwinkqubo yokugaya i-cadcam evulekileyo ye-CE/ISO

Inkcazelo emfutshane:


Iinkcukacha zeMveliso

Iithegi zeMveliso

I-Yucera's 4D kunye ne-Multilayer zirconia block yeyona ndawo iphakamileyo yeklasi ye-zirconia block, eyona ibhloko ye-zirconia yendalo, etshintsha umbala (ukusuka kubumnyama ukuya ekukhanyeni), amandla (ukusuka kwi-1050mpa-1200mpa), kunye nokuguquguquka (43% -57%) ngokuthe ngcembe ukusuka umlomo wesibeleko ukuya kwi-incisal inxalenye kwidiski enye ye-zirconia.

I-Sintered Density yebhloko ye-zirconia 6.07 ± 0.03g/cm3

Ubunzima bebhloko ye-zirconia 1200HV

I-Sintering Ubushushu bebhloko ye-zirconia Ukucebisa i-1530 ℃

Ukugoba Amandla ebhloko ye-zirconia 700-1200Mpa

Ukugqithiswa kwebhloko ye-zirconia 57-43%

Olu hlobo lwe-multilayer zirconia block lungenza amazinyo angasemva kunye namazinyo angaphambili.Ibhloko enye ye-zirconia yokugubungela zonke izibonakaliso.

Ichukumisa ngokulingana kwayo okugqibeleleyo phakathi kokuguquguquka kunye namandla okuveliswa kobuhle bokubuyiselwa kwe-ceramic.Izinto ezithambileyo phambi kokuba sintering ziqinisekisa inkqubo yokuvelisa engenamgudu.

Izinto eziluncedo :

- 16 AD & 3Bleach shades ezikhoyo;

-Ukukhanya okuphezulu (43% -57% ukuhanjiswa kokukhanya okupheleleyo)

- Amandla aphezulu e-flexural

- umbala ochanekileyo, olinganayo kwaye ozinzile;

- Akukho mbala wesandla ofunekayo

Iimpawu

Crown, Inlay, Onlay, 2-5 unit Bridges, Anterior, implant

Iimpawu zeMveliso

Ukhuseleko: Akukho kucaphuka, akukho mhlwa, ukuhambelana okuhle kwebhayoloji

Ubuhle: Umbala wamazinyo endalo unokuphinda uveliswe

Ukukhululeka: Ukuhanjiswa kwe-thermal ephantsi, utshintsho olushushu kunye nokubanda aluyivuseleli ipulp

Ukuqina: Ngaphezu kwe-1600MPa amandla aphazamisayo, ahlala ixesha elide kwaye aluncedo


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi