Medical devices 2021: market opportunities for 5 Axis dental milling machine prostheses, orthotics and audiology equipment
After 2 years of design and development,more than 100 labs tested, Yucera separation of mechanical and electrical control get unanimous praise
1. Horizontal processing-speed can be increased by nearly 20%
2. simplifying maintenance- When the all-in-one machine fails, the after-sales maintenance is more complicated. The split equipment only needs to replace the processing system to complete the update and maintenance;
3.Tool detection sensor with 2um
4.24hours on-line technical support
5.include hyperdent（free）
Advantage of Yucera 5 axis dental milling machine:
1.Based on the original stable vertical machining, the horizontal milling machine puts the center of gravity lower.
Vertical and horizontal processing are both cradle processing (Suitable for small precision parts processing). There is not much difference between these two in the layout and processing mode, but due to the excellent stability of horizontal processing, the speed can be increased by nearly 20%.
2.Easy to maintain: When the all-in-one machine fails, the after-sales maintenance is more complicated. The seperate machine design only needs to replace the processing system to complete the update and maintenance;
3.The control system is separated from the processing system to reduce the slight damage caused by dust for the main engine.
4. 38-40 units crown/bridge. Innovative C clamp design, compared with metal fixture, the utilization rate of zirconia blocks is increased by 30%
Post time: Oct-30-2021