Ngwaahịa
98x10mm HT 1250MPA 1530 ℃ Ihe mgbochi eze zirconia
Ezé Artificial Teeth HT mepere emepe dị eluIhe mgbochi zirconia
98x10mm HT 1250MPA 1530 ℃ ezeIhe mgbochi zirconias
Nkọwa ngwaahịa nke HT Zirconia Block
1.Super translucent ma ọ bụ prettau dakọtara zirconia bụ maka okpueze contour zuru oke na àkwà mmiri.
2.High translucent maka nkịtị ịnagide na àkwà mmiri
3.Ultra translucent maka ihu
- ọkwa mbụ Zirconia ntụ ntụ
- Emere n'okpuru COLD ISOSTATIC UNAXIAL PRESSING AND MAHINING nke na-enye ihe dabara adaba karịa.
- Ike igwe dị elu ruru ihe ruru 600 Mpa akpọrọ zirconia na-abụghị mgbaji
- translucent mara mma na nnyefe ọkụ dị elu karịa 30%
- Mbelata mbelata maka 20%
– Sinterization okpomọkụ 1480 Celcius 2 awa
Nkọwa ngwaahịa zuru oke nke HT White Zirconia Blocks:
| Aha | Yucera HT ọcha mgbochi zirconia mbụ |
| Njupụta nke ihe mgbochi zirconia mbụ | 6.07 ± 0.03g/cm3 |
| Isi ike nke ngọngọ zirconia mbụ | 1200HV |
| Okpomọkụ na-ekpo ọkụ nke ngọngọ zirconia mbụ | kwadoro 1530 ℃ |
| Na-ehulata Ike nke ngọngọ zirconia mbụ | 1200Mpa |
| Ntugharị nke ngọngọ zirconia mbụ | 40% |
Ihe mgbochi zirconia eze Atụmatụ
1.Safety: Enweghị mgbakasị, enweghị corrosion,Ezi bio-ndakọrịta
2.Beauty: Eke ezé agba nwere ike imepụtaghachi
3.Comfortability: Low thermal conductivity, na-ekpo ọkụ na oyi mgbanwe adịghị akpali ndị pulp
4.Durability: N'ime 1600MPa gbagọrọ agbagọ, na-adịgide adịgide na bara uru
Yucera na-enyocha ma rụpụta oghere HT zirconia.Anyị na-ahọrọ elu mma exported zirconium ntụ ntụ, ịgwakọta na dị iche iche acha ntụ ntụ, na ịpị, ịkpụzi, tupu sintering na-eme ka zirconia oghere, na-enyere aka dozie nsogbu ndị dị ka uneven agba, ntụpọ, n'elu doro anya na-adịghị mma agba ọdịiche n'etiti ihu na azụ.
The zirconia oghere bụ na-adịghị egbu egbu na-abụghị redioaktivu na magburu onwe ndu Njirimara, ezé agba dị ka ezi ezé na ezi permeability na aesthetics.Ọ nwere ike dị elu, ịdị mma dị mma na nkwụsi ike dị mma, X-cera pre-shaded zirconia oghere bụ akụrụngwa nwere ọmarịcha akụrụngwa maka ịme okpueze.
Ọdabara usoro: wieland, sirona, kavo, lava, amann girrbach na cercon, wdg.
Uru nke Zirconia
Nnukwu njupụta na ike.
(1) Ike dị 1.5 ugboro dị elu karịa ọgbọ nke abụọ nke EMPRESS.
(2) Ike dị elu karịa 60% karịa INCERAM alumina.
(3) Pụrụ iche mgbape eguzogide na siri ike ọgwụgwọ arụmọrụ mgbe cracking.
(4) Enwere ike ịme akwa akwa akwa nke nwere ihe karịrị nkeji 6, nke na-edozi nsogbu ahụ na enweghị ike iji usoro seramiiki niile mee ogologo àkwà mmiri.
Ngosipụta nke HT ọcha zirconia ngọngọ
Ịnagide, Inlay, Onlay, Bridge, Crown
Mkpọchi nke HT zirconia ngọngọ
| HT/ST Sintering Curve (1-5) | ||||
| Nzọụkwụ na-agwụ ike | Mmalite okpomọkụ(℃) | Ọgwụgwụ okpomọkụ(℃) | Oge (Nkeji) | Ọnụego (℃/Nkeji) |
| Nzọụkwụ 1 | 20 | 300 | 30 | 9.3 |
| Nzọụkwụ 2 | 300 | 1200 | 150 | 6 |
| Nzọụkwụ 3 | 1200 | 1530 | 110 | 3 |
| Nzọụkwụ 4 | 1530 | 1530 | 120 | 0 |
| Nzọụkwụ 5 | 1530 | 800 | 100 | -7.3 |
| Nzọụkwụ 6 | 800 | eke oyi 20 | 120 | -6.5 |
| HT/ST Sintering Curve (nkeji iri) | ||||
| Nzọụkwụ na-agwụ ike | Mmalite okpomọkụ(℃) | Ọgwụgwụ okpomọkụ(℃) | Oge (Nkeji) | Ọnụego (℃/Nkeji) |
| Nzọụkwụ 1 | 20 | 300 | 30 | 9.3 |
| Nzọụkwụ 2 | 300 | 1200 | 190 | 4.7 |
| Nzọụkwụ 3 | 1200 | 1530 | 150 | 2.2 |
| Nzọụkwụ 4 | 1530 | 1530 | 120 | 0 |
| Nzọụkwụ 5 | 1530 | 800 | 120 | -6 |
| Nzọụkwụ 6 | 800 | eke oyi 20 | 120 | -6.5 |
