Yucera CAD CAM 5 Axis Zirconia Milling Machine Don Dental Laboratory Glass Ceramic Composites Wax PMMA

Yucera CAD CAM Zirconia Milling Machine Gilashin yumbu Haɗaɗɗen Wax PMMA

Yucera CAD CAM Kayan Aikin Niƙa Na Musamman Haƙori Zirconia Gilashin Gilashin Gilashin Kakin Kakin PMMA YUC Mills 5000

 Sauƙaƙan gabatarwa don Yucera CAD CAM Injin Niƙa na Musamman:

Bayan shekaru 2 na ƙira da haɓakawa, an gwada gwaje-gwaje sama da 100, Rarrabuwar mu na injiniyoyi da sarrafa lantarki sun sami yabo gaba ɗaya.

1. Ana iya ƙara saurin sarrafawa-tsaye da kusan 20%

2. sauƙaƙe tabbatarwa- Lokacin da duk-in-daya na'ura ya kasa, gyaran bayan tallace-tallace ya fi rikitarwa.Kayan aikin raba kawai yana buƙatar maye gurbin tsarin sarrafawa don kammala sabuntawa da kiyayewa;

3. Tool gano firikwensin tare da 2um

4.24hours tallafin fasaha akan layi

5.hade hyperdent(kyauta)

Ma'aunin fasaha na 5 axis cadcam haƙori niƙa inji:

Takaitaccen Gabatarwa Na 5 axis cadcam hakori milling inji:

1. YANKAN MASHI 2.CONNECTION PLATE A BAYAN YANKAN MASHI 3.KURA 4. KULLA TA GIDAN GIDAN AIKI.

5. HANKALI KOFAR 6.HOST 7.BOARD CONNECTING A BAYAN HOST 8.NUNA NUNA 9.OPERATION PANEL

An ƙera na'urar yankan axis SK-5A don sauƙaƙe sarrafa dijital a fagen fasahar hakori kuma tana iya ɗaukar nau'ikan daban-daban.

nau'ikan kayan aiki.

Hukumar Haɗin Kai A Baya Na 5 axis cadcam hakori milling inji:

1. HADA BUTT DA YANKE MASHI 2.NETWORK POT 3. WUTA WUTA.

4. HADA WUTA 5.AMMA HAƊI DA HOST

6. BAROMETER 7.AIR INLET 8.VACUM PORT

Aiki Hatch na 5 axis cadcam hakori milling inji:

Dole ne a rufe ƙofar ɗakin aiki lokacin da injin ke aiki don hana ma'aikata rauni.Lura: Hattara da raunin rauni yayin buɗewa ko rufe ƙyanƙyashe

●Lokacin bude kofa, rike hannun kofar da hannunka sannan ka daga shi sama

●Lokacin rufe ƙofar, sanya hannunka a gefen ƙananan ƙofar kuma ka tura shi ƙasa

Kunshin 5 axis cadcam hakori milling inji:

5-Axis Milling Machine tare da kumfa EVA nannade cikin kwali + fakitin itace 1PCS/Carton

FAQ:

1. A: Raka'a nawa ne za su iya niƙa?

Tambaya: Tushen zirconia guda ɗaya za a iya niƙa kambin raka'a 50.

2. A: Menene haƙurin injin niƙa zai iya kaiwa?

Q: Daidaitaccen injin mu shine 0.02mm.Ya dace da daidaitawa tare da na'urar daukar hoto na baka .Yana iya niƙa kai tsaye ba tare da ƙirar ƙira ba.Ajiye mataki kuma adana lokaci

3. A: Yadda za a magance kura bayan milling?

Tambaya: Kurar da ke cikin ɗakin aiki ba zai shiga cikin ɗakin kulawa ba, wanda hakan yana da kyakkyawan garanti ga rayuwar sabis na tsarin kewayawa.Outsourcing injin tsabtace gida