Babban Haƙoran Haƙora na Artificial HT Buɗe Nau'in DentalTubalan Zirconia
98x10mm HT 1250MPA 1530 ℃ DentalZirconia Blocks
Bayanin Samfur na HT Zirconia Block
1.Super translucent ko prettau jituwa zirconia ne don cikakken kwane-kwane kambi da gadoji
2.High translucent ga kowa jimre da gada
3.Ultra translucent na gaba
– Farko sa Zirconia foda
- Anyi ƙarƙashin COLD ISOSTATIC UNAXIAL PRESSING DA MACHINING wanda ke ba da ƙarin daidaituwa.
- Babban ƙarfin injin ya kai 600 Mpa wanda ake kira zirconia mara karye
- Kyakkyawan translucent tare da watsa haske sama da 30%
- An daidaita raguwa don 20%
- Yanayin zafin jiki 1480 Celcius 2 hours
Cikakken Bayanin Samfura na HT White Zirconia Blocks:
Suna | Yucera HT farar asali tubalan zirconia |
Sintered Density na asali tubalan zirconia | 6.07 ± 0.03g/cm3 |
Taurin tubalan zirconia na asali | 1200HV |
Sintering Zazzabi na asali tubalan zirconia | Nasiha 1530 ℃ |
Lanƙwasawa Ƙarfin Tushen zirconia na asali | 1200Mpa |
Fassarar tubalan zirconia na asali | 40% |
Dental Zirconia Blocks Siffofin
1.Safety: Babu hangula,Ba lalata,Good bio-daidaituwa
2.Beauty: Za a iya sake haifar da launin hakora na halitta
3.Comfortability: Low thermal watsin, zafi da sanyi canje-canje ba stimulte da ɓangaren litattafan almara
4.Durability: Over 1600MPa perturbed ƙarfi, m da kuma amfani
HT zirconia blanks Yucera ne ke yin bincike kuma ya kera su.Mun zaɓi babban ingancin fitar da zirconium foda, hadawa da daban-daban masu launin foda, latsa, siffata, pre-sintering don sa zirconia blanks, taimaka warware matsalolin kamar m launuka, tabo, kan bayyananne da korau launi bambanci tsakanin gaba da baya.
Zirconia blank ba mai guba ba ne kuma mara amfani da rediyo tare da kyawawan kaddarorin ilimin halitta, launi na hakora kamar hakora na ainihi ne tare da haɓaka mai kyau da kayan ado.Yana da ƙarfi mai ƙarfi, ƙaƙƙarfan ƙarfi da ingantaccen juriya, X-cera pre-shaded zirconia blank shine albarkatun ƙasa tare da kyawawan kayan don yin rawanin.
Tsarin aiki: wieland, sirona, kavo, lava, amann girrbach da cercon, da dai sauransu.
Amfanin Zirconia
Babban yawa da ƙarfi.
(1) Ƙarfin ya ninka sau 1.5 fiye da ƙarni na biyu na EMPRESS.
(2) Ƙarfin ya fi 60% sama da INCERAM alumina.
(3) Juriya na musamman da aikin warkarwa mai wahala bayan fashewa.
(4) Za a iya yin gadoji mai raka'a sama da 6, wanda ke magance matsalar cewa duk tsarin yumbura ba za a iya amfani da shi ba har tsawon gadoji.
Alamun HT farin zirconia block
Kwarewa, Inlay, Onlay, Gada, Crown
Hannun lanƙwasa na HT zirconia block
HT/ST Sintering Curve (1-5) | ||||
Sintering mataki | Fara Zazzabi(℃) | Ƙarshen Zazzabi(℃) | Lokaci (min) | Ƙimar (℃/min) |
Mataki na 1 | 20 | 300 | 30 | 9.3 |
Mataki na 2 | 300 | 1200 | 150 | 6 |
Mataki na 3 | 1200 | 1530 | 110 | 3 |
Mataki na 4 | 1530 | 1530 | 120 | 0 |
Mataki na 5 | 1530 | 800 | 100 | -7.3 |
Mataki na 6 | 800 | sanyaya dabi'a 20 | 120 | -6.5 |
HT/ST Sintering Curve (raka'a 10) | ||||
Sintering mataki | Fara Zazzabi(℃) | Ƙarshen Zazzabi(℃) | Lokaci (min) | Ƙimar (℃/min) |
Mataki na 1 | 20 | 300 | 30 | 9.3 |
Mataki na 2 | 300 | 1200 | 190 | 4.7 |
Mataki na 3 | 1200 | 1530 | 150 | 2.2 |
Mataki na 4 | 1530 | 1530 | 120 | 0 |
Mataki na 5 | 1530 | 800 | 120 | -6 |
Mataki na 6 | 800 | sanyaya dabi'a 20 | 120 | -6.5 |