Products
Dental Lab Use SK-5A 5axis Milling Machine Dry milling CADCAM machine
Dental Lab Use SK-5A 5axis Milling Machine :
Product description
|
weight |
Cuttingmachine：95KG Mainengine：20KG |
|
Rotatingaxisoperating angle |
A：360° B：±30° |
|
Totalpower |
800W |
|
Cuttingprecision |
0.02mm |
|
Toolmagazinecapacity |
5 |
|
Bursspecifications |
Special props for handle diameter 4mm Automatic tool change,automatic Tool detection |
|
Processingmethods |
Five-axis linkage,dry milling |
|
Processabletype |
Inner crowns,full crowns,bridges, Implant bridges, Implant upper restorations,inlays, onlay, veneer,coping etc. |
|
Mainaxisspeed |
0-60,000rmp |
|
Workingpressure |
4.5-7.5bar (No water,no gasoline) |
|
Installation conditions |
Stable voltage：220-230V Stable air pressure≥6.0bar Temperature：15-35℃ Relative humidity＜80% |
|
Transmission interface |
USB/ethernet |
|
Milling Materials |
Zirconia blocks,PMMA,Wax,Composite material |
Equipment maintenance
1.Regular cleaning：Use a suitable liquid detergent to clean the plastic part,and be careful not to use an air gun to clean the Interior to prevent dust and debris from entering the mechanical parts.
2.Materialfixturecleaning:Clamps and screws should be kept clean when placing material for optimum grip
3.Main Axis Clip Cleaning：Do not spray oily spray or compressed air containing oil and water directly on the spindle head; The spindle chuck and bur must be clean.The entry of impurities can cause processing failures.
