Yucera High Translucent Dental Zirconia Block Flexural Strength Fres Par Wieland Dental CADCAM For Tooth Gems Zirconium Blank
Our zirconia block/blanks are compatible with different brands of CAD/CAM system and manual system, such as Zircon system, sirona Inlab system, Kavo system, Amann Girrbach system, and Porland system, etc.
Physical characteristic of HT Zirconia Block Flexural Strength :
1.16 Shades Coloring Liquid
2.High Translucency >40%
3.Flexural Strength ≥1200Mpa
4.100% Safe Lowest Radioactivity of ZrO2 powder
Features of HT Zirconia Block Flexural Strength:
1. High translucent
2. Brilliant bending strength and economical block
3. Suitable for coping, framework, Coping / Inlay / Onlay / Bridge /Crown
Advantage of HT Zirconia Block Flexural Strength:
The thickness of HT zirconia block ranges from 10mm,12mm,14mm,16mm,18mm,20mm,22mm and 25mm.Compatible with Roland,Wieland,VHF,Amann Girrbach,Yenadent and
other most open CAD CAM milling machines.
All of our zirconia blocks are isostatically pressed to insure a uniform shrinkage and density by the sintering process.
We can keep a good quality know-how in powder comparable chinese most fine zirconia powder ,due to their high-ranking properties for purity and quality to make our
disks the best they can be.
Our Yucera zirconia blocks are allergen-free and bio-inert. It will not transmit heat or cold from the mouth to the surrounding bone.You can use it confidently and safely.
Yucera zirconia blocks are softer than the generic zirconia, which can well take care of your spindle and other milling
tools,you can use them much longer.
Sintering step for HT Zirconia Block Flexural Strength:
HT/ST Dental Zirconia Block Sintering Curve (1-5) | ||||
Sintering step | Start Temperature(℃) | End Temperature(℃) | Time(Min) | Rate(℃/Min) |
Step 1 | 20 | 300 | 30 | 9.3 |
Step 2 | 300 | 1200 | 150 | 6 |
Step 3 | 1200 | 1530 | 110 | 3 |
Step 4 | 1530 | 1530 | 120 | 0 |
Step 5 | 1530 | 800 | 100 | -7.3 |
Step 6 | 800 | natural cooling 20 | 120 |
-6.5 |
HT/ST Dental Zirconia Block Sintering Curve (10 units) | ||||
Sintering step | Start Temperature(℃) | End Temperature(℃) | Time(Min) | Rate(℃/Min) |
Step 1 | 20 | 300 | 30 | 9.3 |
Step 2 | 300 | 1200 | 190 | 4.7 |
Step 3 | 1200 | 1530 | 150 | 2.2 |
Step 4 | 1530 | 1530 | 120 | 0 |
Step 5 | 1530 | 800 | 120 | -6 |
Step 6 | 800 | natural cooling 20 | 120 | -6.5 |
Compatible with Yucera HT coloring liquid (16 shades):
A1 A2 A3 A4
B1 B2 B3 B4
C1 C2 C3 C4
D2 D3 D4
Real cases and feedbacks for HT Zirconia Block Flexural Strength